Jeep Airbag Module Reset Service (SRS / Airbag Control Module)
Get your Jeep safely back on the road with our professional Jeep airbag module reset service. When a Jeep is involved in an accident, the SRS airbag control module stores crash data and deployment information that locks the system and turns on the airbag warning light. Once this happens, a simple scan tool clear will not fix the problem.
At Module Repair Lab, we reset your original Jeep airbag control module at the electronic memory level. After the reset, the module is restored to factory operating condition so it can be reinstalled as a true plug-and-play unit in most cases.
Fast, Professional Jeep Airbag Module Reset
Once your module arrives at our facility, our technicians perform a full diagnostic and crash data reset. Most Jeep SRS modules are completed within one working day and shipped back promptly to minimize downtime.
In the majority of cases, no dealer programming is required because we work with your original module and retain the vehicle’s VIN information. If the vehicle detects separate faults in airbags, seat belts, or sensors after reinstallation, those components may still need attention.
When You Need a Jeep Airbag Module Reset
This service is designed for Jeeps that have:
- An airbag or SRS warning light illuminated on the dash
- Crash data stored after an accident
- Deployed airbags or locked seat belt pretensioners
- Diagnostic reports showing “crash data stored” or similar SRS codes
- A dealer recommendation to replace the airbag control module
Even a relatively minor collision can trigger permanent crash data inside the module. Resetting your original Jeep module is a cost-effective alternative to replacement and avoids the hassle of coding a different unit to your vehicle.
What Our Jeep Airbag Module Reset Service Includes
- Removal of stored crash and deployment data from the SRS module
- Clearing of hard crash codes related to previous accidents
- Restoration of normal communication with airbags and seat belts
- Retention of original VIN and configuration data
- Module returned ready for plug-and-play installation in most cases
Jeep Models Supported
We service a wide range of Jeep airbag control modules, including but not limited to:
CJ series (CJ3, CJ5, CJ6, CJ7), Cherokee, Grand Cherokee, Grand Wagoneer, Wagoneer, Wrangler, TJ, Liberty, Compass, Patriot, Renegade, Commander, Comanche, Gladiator, Scrambler, Utility / Utility Wagon, Truck and Universal / Universal Truck platforms, as well as many other Jeep models equipped with factory SRS systems.
Common Jeep Airbag / SRS Codes We Address
During the reset process we target crash and internal fault codes commonly seen in Jeep SRS modules, including but not limited to:
- B107E – Airbag module related fault
- B207F – SRS unit internal error
- B1015 – Faulty airbag control module
- B1139 – Internal SRS module error
- B1193 – Airbag system related fault
- B1206 – Airbag RCM fault
- B1342 – SRS system failure
- B1620 – SRS communication error
- B1649 – Crash detected
- B1650 – Crash detected
- DF194 – After-accident event stored
Module Names and Technical Notes
Depending on model and year, Jeep airbag control modules may be listed as an Airbag Module, SRS Airbag Control Module, SDM (Sensing Diagnostic Module), RCM (Restraint Control Module), or Airbag ECU. All of these refer to the primary crash sensing and deployment controller.
Many late-model Jeeps store partial VIN and configuration data in the SRS module. This is why resetting your original unit is preferred over trying to install a used or mismatched replacement that requires additional programming.
What If the Airbag Light Is Still On?
If the airbag light remains on after you reinstall the reset module, it usually indicates a separate fault in the SRS system such as:
- Damaged or unplugged airbags
- Locked or faulty seat belt pretensioners
- Faulty clock spring in the steering column
- Damaged impact or crash sensors
- Wiring or connector issues
In these cases, a scan tool will typically report a soft code that points to the affected component. Those issues must be resolved separately from the module reset.
Why Choose Module Repair Lab for Your Jeep
By resetting your original Jeep airbag module instead of replacing it, you:
- Avoid dealer programming fees and repeat trips
- Keep your factory VIN and configuration intact
- Save money compared to new or used module replacement
- Get fast turnaround on a critical safety component
Module Repair Lab confidently stands behind our Jeep airbag module reset service with a 100% satisfaction guarantee. If your module cannot be reset, we will contact you with available options before proceeding.
Please ship your module to the following address:
Module Repair Lab
8698 Elk Grove Blvd Ste 1, Elk Grove, CA 95624
Make sure to include your contact information and order number inside the package to help us process your repair quickly.
We recommend using a trackable and insured shipping method to ensure safe delivery. Once your repair is complete, we will ship it back to the return address you provide.
If you have any questions, feel free to contact us.
How it Works
We offer a cost-effective solution to pricey dealership part replacements, saving you a significant amount of money. Our approach goes beyond simply repairing the faulty part – we address the underlying issue and use top-quality upgraded parts to ensure a long-lasting fix. We stand behind our service with a 100% satisfaction guarantee or your money back.
- To get started, carefully remove the part from your vehicle. If you’re unsure how to do this, you can take it to your local body shop for assistance.
- Once the part is removed, pack it securely in a suitable box to prevent any damage during transit.
- Don’t forget to print out your order confirmation page and include it in the package, along with your name, return address, and phone number
FAQs
8698 Elk Grove Blvd #1, Elk Grove, CA 95624
info@modulerepairlab.com
Turnaround time is fast—typically 2 to 3 business days once we receive your module.
You can pay on the website with PayPal or a credit card or you can send the module in with your information and we will contact you for a credit card after the repairs have been performed.
Yes, warranty depends on the module being repaired.